Shanghai Pullner Filtration Technology Co., Ltd.
Shanghai Pullner Filtration Technology Co., Ltd.
Add to Cart
Nylon/PES/PTFE/PVDF/GF 0.22um 10" Pleated Filter Cartridge OD2.7" Length 10"
General description
The Nylon pleated membrane filter cartridge is made of nylon microporous film and non-woven fabric or mesh inner and outer support layer. The filter shell, center rod and end cover are made of polypropylene. The whole filter is sealed by thermal welding technology. Complete, no leaks.
Dimensions
| Outer diameter | 2.7" (69mm) |
| Length | 10", 20", 30", 40" |
Material of Construction
| Filter Medium | Nylon |
| Support/Drainage | PP |
| Center core/Outer Cage/End Caps | PP |
| Seals Material | NBR, Silicone, EPDM, Viton, Teflon |
Filter Performance
| Removal rating | 0.1um, 022um, 0.45um |
| Max. operating temperature | 60℃ |
| Max. operating differential pressure | 4.2 Bar @ 25℃ |
|
Max. operating differential pressure (Reverse direction) |
2.1 Bar @ 25℃ |
| Max. temperature sterilization | 30 times, 30 minutes at 121℃ |
Applications
Pharmaceutical industry: various solvent and liquid filtration;
Food and beverage industry: pure water, mineral water, juice, beer and alcohol filtration;
Electronics industry: terminal filtration of high purity water and distilled water;
Features
1. Nylon membrane is hydrophilic, no need to pre-wet;
2. Uniform pore size distribution, good filtration effect;
3. High strength, good chemical compatibility, wide applicability;
4. No fiber shedding, in line with the requirements of the pharmaceutical and food industry;
5. Clean environment production, high filter cleanliness;
6. The dual effects of electrostatic adsorption and microfiltration;
7. Ultrasonic welding without any adhesive;
8. Resistant to organic solvents and oils;
9. Absolute filtration accuracy and long service life;