Shanghai Pullner Filtration Technology Co., Ltd.
Shanghai Pullner Filtration Technology Co., Ltd.
Add to Cart
100% Integrity test Membrane Pleated Filters Pharmaceutical Filters PTFE PES PVDF Nylon
General Description
The membrane filter element is made of imported membrane and imported non-woven fabric and mesh as the support layers. The filter outer cage, center core and end cap are formed by thermal welding technology, no adhesive used. They are produced in clean room, 100% integrity tested and flushed with high purity water. Suitable for filtration of weak acid/alkali liquids and high purity water.
Features
The porous membrane structure allows the filter element to have high filtration efficiency;
Bigger filtration area guarantees high throughput and long life;
100% integrity test;
18MΩ pure water flush;
Application
Injection water, blood products, sterilizing and filtering of medicinal solvents;
Cleaning and disinfecting solution;
Sterilization filtration of biological products;
Sterilization filtration of beer, wine, beverages, etc;
Eye drop filtration;
Material of Construction
|
Model |
Membrane Pleated Filters |
|
Filter Medium |
PTFE PES PVDF Nylon |
|
Support/Drainage |
Polypropylene |
|
Center core/Outer Cage/End Caps |
Polypropylene |
|
Seals Material |
NBR, Silicone, EPDM, Viton |
Filter Performance
|
Micron |
0.1um, 0.22um, 0.45um, 0.65um |
|
Length |
10", 20" |
|
Interception rate |
100%, 107CFΜ/cm² |
|
Max. operating temperature |
80℃ |
|
Max. operating differential pressure |
0.42Mpa at 25℃ |
|
Max. operating differential pressure (Reverse direction) |
0.21Mpa at 25℃ |
|
Applicable PH |
1-14 |