Shanghai Pullner Filtration Technology Co., Ltd.
Shanghai Pullner Filtration Technology Co., Ltd.
Add to Cart
JDW-11FS Horizontal High Flow Skid Filter Housing
Applications
1.It can be widely used in UF, RO, EDI security filtration and end- filtration, medicine injection, large infusion, eye drops,.
2. Chinese herbal medicine, such as liquid filtration, biological agents extraction, purification and concentration.
3. Electronics, semiconductor industry with high purity water preliminary filter, terminal filter.
4. Oil field back to water injection, boiler makeup water, chemical reagent, liquid organic products, high purity chemicals, strong medicine and other filtration.
5. Drinking pure water, mineral water, fruit juice, tea beverages, health drinks filtering.
6. Liquor, wine, beer, yellow wine and other fruit wine filtration, pure draft beer aseptic filtration (alternative pasteurized)
7. The life and production waste water treatment and water recycling process of pre-treatment filtering or security filtering.
8. Biological engineering, oil refining, printing and dyeing, textile industry water supply and waste water treatment, research and test filter, etc.
High Flow Skid Filter Housing General Description
JDW-11FS horizontal high flow skid filter housing offers wide range of flow capacities and contaminant holding capacities. Cartridge filters are normally used as polishing filter in almost all process industries. Cartridge filter is constructed of filter housing, filter cartridges, tube sheet, positive sealing arrangement for cartridge depending upon type of cartridge & choice of end connections. Positive sealing arrangement for cartridge filter assures no particle migration or fiber migration, even after high differential pressures.
High Flow Skid Filter Housing Technical Parameters
Filter material:SS304,316L,carbon steel
Filter cartridge size: diameter 6"(152mm)
height:40"(1016mm) or 60" (1524mm)
Seal type: O Type Ring
Surface treatment: Matt
Filter accuracy:1,3,5,10,20,30,50,70,100um
High Flow Skid Filter Housing Material
| Housing Body | 304/316L |
| Vent / Drain | 304/316L |
| Eye bolt | 304 |
| Feet | 304 |
| Sealing | Silicone, Viton, EPDM, PTFE |
High Flow Skid Filter Housing Connection
| Housing Connection | Eyebolt |
| Inlet / Outlet | Flange |
| Vent | G1/2" |
| Drain | G1/1" |
| Pressure Gauge | M14*1.5 |
Features
1. Inlet & outlet size is 1/2", 3/4", 1 inch, easy installation.
2. Working pressure 8kg/0.8Mpa is supported.
3. Use the tap water pressure to provide power, no power consumption.
4. This is suitable for using in the water master switch, for the pre filtration system and RO system protection.
5. Resistance to strong acid and alkali.
6. Low cost, it fits different kind of filter elements.
